JK/JKL Deluxe Winch Bull Bar

ARB deluxe bull bars are particularly suitable for North American backcountry driving, where the threat of wandering wildlife is constant. Deer, moose and bears pose a constant threat to motorists, and an ARB deluxe bar is the best defense available.

Part #
$.00 + Shipping($.00)

Grand Cherokee WH / WK Deluxe Winch Bull Bar

ARB deluxe bull bars are particularly suitable for North American backcountry driving, where the threat of wandering wildlife is constant. Deer, moose and bears pose a constant threat to motorists, and an ARB deluxe bar is the best defense available.

Part #
$.00 + Shipping($.00)

JK Stubby Winch Guard

JK Stubby Winch Guard (JKSL1102-P) – The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾” diameter x .120 wall tubing and is angled forward and welded for strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat.

Part # JKSL1202-P
$769.00 + Shipping($.00)

JK Stubby

JK Stubby Basic (JKSL1102-P) – The shorter width of this bumper provides full tire exposure for maximum approach angles. The stout design allows for maximum wheel clearance and front-end protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat

Part # JKSL1102-P
$669.00 + Shipping ($.00)

JK Medium Basic

JK Medium Basic (JKML1102-P) - The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use and allows for maximum wheel clearance and good fender protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat.

Part # JKML1102-P
$669.00 + Shipping ($.00)

JK Medium Winch Guard

JK Medium Winch Guard (JKML1202-P) - The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use. Provides additional protection for the winch. The robust design allows for excellent wheel clearance and good fender protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾” diameter x .120 wall tubing and is angled forward and welded for strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat.

Part # JKML1202-P]
$769.00 + Shipping ($.00)

JK Medium Fenderbar

JK Medium Fenderbar (JKM1302-P) - The width of this midsize bumper extends to about the middle of the fender. This gives the bumper a sporty look with ample protection and approach angles for off road use. Provides maximum winch and fender protection. The robust design allows for excellent wheel clearance and maximum front-end and fender protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾” diameter x .120 wall tubing and is angled forward. The fender bars are constructed of 1 5/8” x .120 wall tubing and are angled back and welded for maximum strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat.

Part # JKML1302-P
$869.00 + Shipping ($.00)

JK Fullsize Fenderbar

JK Fullsize Fenderbar (JKFL1302-P) - This full width bumper gives maximum protection to fenders. The classic Hanson design, along with a thinner outer wing than stock bumpers, gives the vehicle a cleaner front profile so it looks less bulky. Provides maximum winch and fender protection. The robust design allows for excellent wheel clearance and maximum front-end and fender protection. It’s handcrafted from 3/16” cold-rolled steel. Multiple angles are used in the construction for optimum approach and departure angles. The 2” dropped winch deck accommodates most winches and allows for better airflow to radiator and a lower center of gravity. The multiple angles and the dropped winch deck combined give the bumper superior strength. The winch bar is constructed of 1 ¾” diameter x .120 wall tubing and is angled forward. The fender bars are constructed of 1 5/8” x .120 wall tubing and are angled back and welded for maximum strength. The unique placement and design of the 1” wide clevis tabs gives them unmatched strength allowing them to be pulled from any angle without fear of damage to bumper or tab, and do not interfere with approach and departure angles. Tab is drilled for a 7/8” pin. Bumper provides accommodation for factory driving or after market lights. The well-known value and quality of a Hanson product is exemplified in this handcrafted bumper. It comes in a black semi-gloss powder coat.

Part # JKFL1302-P
$899.00 + Shipping ($.00)

JK Crawler Front Winch Bumper

LoD Crawler Front winch bumper for the 2007-2010 Jeep JK is constructed of 3/16" steel and is designed for maximum clearence and approach angle. The bumper comes Powder Coated with either a light Textured Black finish or a Matte Black finish. The bumper is built to accept two aftermarket offroad lights. The Hidden mounting bolts add to the clean and tough look of the Crawler bumper. The bumper comes standard with a winch mounting plate. The winch plate is designed to accept many of the popular winches including the Warn Powerplant. This bumper was designed to allow the winch to sit between the frame rails for added protection and improved air flow. Note: This bumper will not accept the factory fog lights.

Part No. CFB1005
Price: $638.00 + Shipping ($129.00)

JK Full-Width Front Bumper

LoD is now offering a full width front bumper option to our extensive Jeep JK product line. The bumper comes standard with a winch mounting plate. The winch plate is designed to accept many of the popular winches including the Warn Powerplant. The bumper comes standard to accept the factory fog lights.

Note: If your Jeep did not include the factory fog light option we have a 55 watt halogen kit that can be used with this bumper.

Part No. JKF1001
Price: $739.00 + Shipping ($129.00)

JK Signature Series Shorty with Stinger

It's here...LoD is now offering the poplar Signature Series Shorty with a "stinger" guard. The bumper comes standard with a winch mounting plate. The winch plate is designed to accept many of the popular winches including the Warn Powerplant. This bumper was designed to allow the winch to sit between the frame rails for added protection and improved air flow. They also were designed to accept the factory fog lights. If the fog lights were not an option on your Jeep its no problem we also offer a 55 watt halogen fog light kit. If our kit is purchased we will make the necessary changes to accommodate our lights. Also optional on this bumper is a guard that comes standard with two auxiliary light mounting tabs.

Part No. SSS1004
Price: $658.00 + Shipping ($129.00)

JK Signature Series Shorty

The LoD Signature Series Shorty is constructed of 10 gauge, 3/16", and 1/4" steel. The bumper comes standard with a winch mounting plate. The winch plate is designed to accept many of the popular winches including the Warn Powerplant. This bumper was designed to allow the winch to sit between the frame rails for added protection and improved air flow. They also were designed to accept the factory fog lights. If the fog lights were not an option on your Jeep its no problem we also offer a 55 watt halogen fog light kit. If our kit is purchased we will make the necessary changes to accommodate our lights. Also optional on this bumper is a guard that comes standard with two auxiliary light mounting tabs.

Part No. SSS1005 - Weight 98.00 lbs
Price: $569.00 + Shopping ($99.00)

JK Signature Series Mid-Width
Front Winch Bumper

The LoD Signature Series Mid-Width is constructed of 3/16" steel. The bumper includes two clevis mounts and comes standard with a winch mounting plate. The winch mounting plate is constructed of 1/4" steel. The bumper also comes standard with provisions to accept the factory fog lights or we can supply a light kit with provisions for those lights. If our kit is purchased it will come with two 55 watt halogen lights, and a wiring kit including a switch. An optional guard is also available as well as a bolt-on skid plate for even more added protection. You will have a choice of coating options. The two powder coating options available are matte black or semi-gloss textured black. The semi-gloss textured coating is a close match to the factory fender flares. The matte black option is essentially a flat black smooth finish. The photo shown is an example of the matte black finish.

Part No. SSM1008 - Weight 72.00 lbs
Price: $599.00 + Shipping ($89.00)

JK Crawler Stubby Front Bumper

PUREJEEP, your new choice for Jeep® parts and accessories, now offers replacement front bumpers for the New 2007 Jeep® Wrangler JK. The PUREJEEP PJ1002 Stubby Crawler bumper features a narrow design that provides more approach angle for the front tires when tackling large rocks on the trail and looks great too.

The PJ1002 Stubby Crawler bumper is a clean-looking flat-top design for those who do not plan to run a front winch. The PJ1002 bumper accommodates the factory fog lamps and fits over the factory under-rider bar that hangs below the frame, protecting it from trail damage.

PUREJEEP bumpers are made from 3/16 steel plate that is laser cut, precision bent and fully welded at all seams to produce the best bumper on the market for your 2007 Jeep® Wrangler JK.

Whether you're onto rock crawling or easy weekend trips with the family, A PUREJEEP JK bumper is the perfect upgrade to improve the looks and functionality of your new Wrangler. PUREJEEP bumpers are available in semi-gloss black powder coat standard or on special order in bare steel for those who want to paint the bumper to match their Jeep®.

Price: $489.95 + Shipping ($.00)

JK Crawler Stubby Front Winch Bumper

PUREJEEP, your new choice for Jeep® parts and accessories, now offers replacement front bumpers for the New 2007 Jeep® Wrangler JK. The PUREJEEP PJ1000 features a narrow bumper design that provides more approach angle for the front tires when tackling large rocks on the trail and looks great too.

The PJ1000 bumper is ready to accept most winches up to 9,500 lbs in capacity with either a roller or hawse fairlead, and the bumper design drops the winch down between the frame rails so that the winch cable pulls on the centerline of the vehicle frame, (Seen here with a Warn NEW PowerPlant winch in place). In addition, bumper fits over the factory under-rider bar that hangs below the frame, protecting it from trail damage.

PUREJEEP.com bumpers are made from 3/16 steel plate that is laser cut, precision bent and fully welded at all seams to produce the best bumper on the market for your 2007 Jeep® Wrangler JK.

Whether you're onto rock crawling or easy weekend trips with the family, A PUREJEEP JK bumper is the perfect upgrade to improve the looks and functionality of your new Wrangler. PUREJEEP bumpers are available in semi-gloss black powder coat standard or on special order in bare steel for those who want to paint the bumper to match their Jeep®.

NOTES: Factory fog lamps can not be used with the PJ1000. Warn 8274 winches will not fit the PJ1000.

Price: $549.95 + Shipping ($.00)